Lampworking Torches, Bench Burners & Accessories

Bethlehem Burners various glassworking accessories. Find what you need here to get the most out of your torch. We've got bases, valves, hoses and more! Check out our selection.

Glassworking Accessory
Y-Connector Set
$55.00
The Y-connector set works with the Bravo and Champion torches. The Brass Y’s in conjunction with a 4 Torch hose set convert the torch from a 4-inlet manifold, into a 2-inlet manifold, for those who do not want to use a foot peddle with their Bravo or Champion torch.
Glassworking Accessory
T-Connector Set
$62.00
The T-connector set works with the Champion torch. Designed to provide a higher fuel flow rate than Y-connectors, and are recommended for use with Champion torch to reach the torch's full flame potential.
Glassworking Accessory
Showerhead Connector Set
$75.00
The Showerhead connector set works with the Grand torch. The Brass and aluminum Showerhead’s in conjunction with a 6 Torch hose set convert the torch from a 6-inlet manifold, into a 2-inlet manifold, for those who do not want to use a foot peddle with their Grand torch.
Glassworking Accessory
4 Torch Hose Set
$110.00
This torch hose set works with the Bravo and Champion torch. The 4 Torch Hose Set, in conjunction with the Y or T-Connector Set, convert a 4-inlet torch manifold into a 2-inlet manifold. The set of 4 torch hoses consists of 2 18” long, 1/4” T-grade, oxygen welding hoses and 2 18” long, 1/4” T-grade, gas welding hoses. Each hose has female brass B-fittings crimped onto each end and each hose comes with one male B-fitting union.
Glassworking Accessory
6 Torch Hose Set
$165.00
This 6 torch hose set works with the Grand torch. The set of 6 torch hoses consists of 3 18” long, 1/4” T-grade, oxygen welding hoses and 3 18” long, 1/4” T-grade, gas welding hoses. Each hose has female brass B-fittings crimped onto each end and each hose comes with one male B-fitting union.
Glassworking Accessory
Quad Manifold
$390.00
The Quad Manifold includes four independent fuel inlets for separate control of the inner and outer flames on the PM2D-WC water cooled bench burner. This special manifold allows independent control of the outer flame when used with Foot Pedal Mechanism Model E2 (shown below). Gas and oxygen are fed to the burner's inner flame by two of the inlets, while gas and oxygen are fed to the outer burner flame from the foot-controlled outlet. This allows the operator to instantly turn the outer flame on and off from the foot pedal.
Glassworking Accessory
Torch Cleaning Kit
$20.00
The working life of a Bethlehem torch is greatly enhanced when properly cleaned. Removal of carbon deposits on the face of the burner will prevent hot spots and deliver a clean particle free flame. The kit includes a wooden dowel striker, two wires for gas ports cleaning, a wire brush and instructions.