Lampworking Torches, Bench Burners & Accessories

Showing 13–24 of 26 results

  • Champion Hose and T Connector Set

    T Connector and Hose Set

    The T Connector and Hose Set consists of 2 18” long, 1/4” T-grade, oxygen welding hoses and 2 18” long, 1/4” T-grade, gas welding hoses and 1 brass oxygen T connector and 1 brass gas T connector. Each hose has female brass B-fittings crimped onto each end and each hose comes with 1 male B-fitting union.

  • Grand Hose and Shower Head Set

    Grand Hose and Showerhead Set

    The Grand Hose and Showerhead Set consists of 3 18” long, 1/4” T-grade, oxygen welding hoses and 3 18” long, 1/4” T-grade, gas welding hoses and 1 brass oxygen Showerhead connector and 1 brass gas Showerhead connector. Each hose has female brass B-fittings crimped onto each end and each hose comes with 1 male B-fitting union.

  • Valves

    Valves

    Bethlehem Burners’ signature modular valves are engineered with precision needles to provide artists with smooth, precise fuel adjustments. Replacement oxygen and gas valves are available for the Alpha, Bravo, and Champion torches. Valves come standard with knobs, b-fittings, and hose.

  • Glassworking T-Shirt

    This official Bethlehem Burners t-shirt is the ultimate flameworking accessory to wear when creating your next best piece of artwork. Sizes – S, M, L, XL 100% Cotton, Tagless

  • Bethlehem Burners glassworking hoodie front

    Glassworking Hoodie

    This official Bethlehem Burners glassworking hoodie is the ultimate flameworking accessory to wear when creating your next best piece of artwork. Sizes – M, L, XL and 2XL 80% Cotton, 20% Polyester.

  • y-connectors for glassworking torches

    Y-Connector Set

    The Y-connector set works with the Bravo and Champion torches. The Brass Y’s in conjunction with a 4 Torch hose set convert the torch from a 4-inlet manifold, into a 2-inlet manifold, for those who do not want to use a foot peddle with their Bravo or Champion torch.

  • t-connectors for glassworking torches

    T-Connector Set

    The T-connector set works with the Champion torch. Designed to provide a higher fuel flow rate than Y-connectors, and are recommended for use with Champion torch to reach the torch's full flame potential.

  • Showerhead connector set

    Showerhead Connector Set

    The Showerhead connector set works with the Grand torch. The Brass and aluminum Showerhead’s in conjunction with a 6 Torch hose set convert the torch from a 6-inlet manifold, into a 2-inlet manifold, for those who do not want to use a foot peddle with their Grand torch.

  • 4 Torch Hose Set

    4 Torch Hose Set

    This torch hose set works with the Bravo and Champion torch. The 4 Torch Hose Set, in conjunction with the Y or T-Connector Set, convert a 4-inlet torch manifold into a 2-inlet manifold. The set of 4 torch hoses consists of 2 18” long, 1/4” T-grade, oxygen welding hoses and 2 18” long, 1/4” T-grade, gas welding hoses. Each hose has female brass B-fittings crimped onto each end and each hose comes with one male B-fitting union.

  • 6 Torch Hose Set

    6 Torch Hose Set

    This 6 torch hose set works with the Grand torch. The set of 6 torch hoses consists of 3 18” long, 1/4” T-grade, oxygen welding hoses and 3 18” long, 1/4” T-grade, gas welding hoses. Each hose has female brass B-fittings crimped onto each end and each hose comes with one male B-fitting union.

  • Quad Manifold

    The Quad Manifold includes four independent fuel inlets for separate control of the inner and outer flames on the PM2D-WC water cooled bench burner. This special manifold allows independent control of the outer flame when used with Foot Pedal Mechanism Model E2 (shown below). Gas and oxygen are fed to the burner's inner flame by two of the inlets, while gas and oxygen are fed to the outer burner flame from the foot-controlled outlet. This allows the operator to instantly turn the outer flame on and off from the foot pedal.

  • cleaning kit

    Torch Cleaning Kit

    The working life of a Bethlehem torch is greatly enhanced when properly cleaned. Removal of carbon deposits on the face of the burner will prevent hot spots and deliver a clean particle free flame. The kit includes a wooden dowel striker, two wires for gas ports cleaning, a wire brush and instructions.