 |
| CLICK TO ENLARGE |
 |
“I love my water cooled PM2D Bench Burner! It's incredibly versatile, producing a wide variety of working atmospheres, from a soft reductive heat, to an incredibly hot oxidizing flame. It's the best torch I've found for working with color, and it gives me precise control over my palette, enabling me to get gorgeous selective restriking effects.”
- Suellen Fowler - |
|
Face Pattern |
|
|
Bethlehem Model PM2D-WC Water Cooled Bench Burner incorporates design features of two of our surface-mix hand torches in a single bench burner. The head has two burners that operate independently or simultaneously to work glass tubing from 3mm to 100mm.
All burner operations are surface-mix, where the fuel mixing of gas and oxygen take place outside the burner head. This design keeps the burner operating at a cooler temperature, while giving an intensely hot flame. Burner fuels are channeled through small front face holes and hypo-tubing, producing a laminar flow. The operator can change the flame length without changing the flame temperature. The result is a burner that will increase the amount of flame without changing the even flame temperature required for flameworking.
The PM2D-WC comprises a nickel-plated brass body with a head of stainless steel that is silver clad to a tellurium copper front plate. The stainless steel helps reflect the high heat generated by the flame, while the tellurium copper front plate conducts the heat away from the head to the finned body for cooling. The PM2D-WC will work on either low or high pressures – gas 1/4 psi to 10 psi and oxygen 10 psi to 20 psi. Recommended gases are: manufactured gas, natural gas, propane or hydrogen, all with oxygen.
Specifications:
- Burner configuration:
- Center fire – 6 jets
- Outer fire – 60 gas jets
- Face dia. - 1-1/4" (31.8mm)
- Flame width: 2mm – 45mm
- Full flame gas consumption: 37 cu. ft./hr (1050
l/hr); oxygen: 65 cu. ft./hr. (1846 l/hr)
- Works:
- Rod - 1-3/4" (44mm)
- Tube - 80mm+
- Dimensions: 7 1/2" manifold with a 6” base
- Net weight: 10 lb.
E2 Oxy-Pro Saver Foot Pedal Assembly
Operating Instructions |
Artist:
Suellen Fowler
Artist Gallery
 |
|
