 |
| |
|
 |
| |
|
 |
Quad Manifold
The Quad Manifold includes four independent fuel inlets for separate control of the inner and outer flames on the bench burner.
This special manifold allows independent control of the outer flame when used with Foot Pedal Mechanism Model E2 (shown below). Gas and oxygen are fed to the burner's inner flame by two of the inlets, while gas and oxygen are fed to the outer burner flame from the foot-controlled outlet. This allows the operator to instantly turn the outer flame on and off from the foot pedal. |
| |
|
|
| |
|
|
E2 Oxy-Pro Saver Foot Pedal Assembly
The E2 Oxy-Pro Saver Foot Pedal Assembly is designed for use with a wide range of burners including all Bethlehem Burner models. Featuring pilot adjustments for both oxygen and gas this foot pedal provides convenient foot control of the outer flame. The foot pedal is spring-loaded and will revert to the pilot flame when not depressed.
NOTE: This pedal will not work on pre-mix burners.
Operating Instructions |
| |
|
|
| |
|
|
Water Cooling Attachment
The Water Cooling Attachment converts the burner into a water cooled model that will extend it's life. The attachment mounts on the front of the burner and is fastened with an allen screw. |
| |
|
|
| |
|
|
WCK Water Cooling Kit
The WCK Water Cooling Kit provides all the necessary items to utilize your Water Cooled Bench Burner. The kit includes one six-gallon bucket, one submersible pump, one flow control valve, and 10 feet of poly-tubing.
Keep your burner cool for hours simply by operating the pump. |
| |
|
|
| |
|
|
UB Universal Torch Base
The UB Universal Torch Base is designed to hold either the Minnow, Betta or Barracuda torches. |
| |
|
|
| |
|
|
PF In-Line Particle Filter
The In-Line Particle filter is designed tp keep the gas and oxygen lines free from dirt and debris. |
| |
|
|
| |
|
|
Torch Cleaning Kit
The working life of a Bethlehem torch is greatly enhanced when properly cleaned. Removal of carbon deposits on the face of the burner will prevent hot spots and deliver a clean particle free flame. The kit includes a wooden dowel striker, two wires for gas ports cleaning, a wire brush and instructions. |
